Prepare the machine and loading details
Provide the exact mini excavator model and its weight in the configuration that will travel over the ramps. Include fitted attachments and any other load actually carried. For tracked machines, provide track width, track material and ground contact length. For wheeled machines, include wheelbase and wheel dimensions.
- Measure the height of the loading deck.
- Photograph its edge and the area where the ramps will rest.
- State the space available in front of the vehicle for the ramps.
- Check the machine documentation for approach and deck-transition limitations.
What a specific Grent product shows
The Grent CR 150/35 W is offered as a pair of ramps, each 3,500 mm long with an internal width of 450 mm. Its product page specifies rubber wheels or tracks and explicitly excludes steel wheels and steel tracks.
The capacity table applies to a pair and varies with the stated wheelbase or spacing. One maximum figure therefore cannot serve as a recommendation for every mini excavator. This model illustrates the parameters to check; it is not an automatic selection for your machine.
Do not guess length or support details
Suitable length depends on loading height and the permitted conditions for both machine and ramp. Width, the supporting end and securing against movement must also be checked against the instructions. Adequate width alone does not establish suitability. Assess the complete transition from ground to vehicle before buying.
If the same pair will load several machines or serve different vehicles, list each combination separately. Suitability for one arrangement does not establish suitability for the others.
Frequently asked questions
Is a capacity above the excavator's weight enough?
No. Load distribution, track contact length or wheelbase, loading height and the manufacturer's conditions must also match.
Can I use this Grent model with steel tracks?
No. The CR 150/35 W product page excludes that use. Steel tracks require a solution expressly intended for them.
What should I send for a ramp recommendation?
The machine model and weight, track or wheel details, loading height and photographs of the deck.
Choose ramps for your actual loading arrangement
Explore aluminium ramps and our ramp selection guide.
